Wholesale China Castings Factory Quotes – Style Grooved Reducing Cross – DIKAI

Product introduction

The Elbow are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard.It is connected with coupling and cooperates with each other. It is used in the place where the diameter of fire pipeline changes.  which is mainly used in water spray system and fire water system. Grooved pipe parts together with grooved couplings ensure fast and easy installation of piping. Grooved parts replace the traditional welded pipe parts.It is listed by Underwriters Laboratories of the FM Approved.We are looking forward to establish long term business relation with you.

Available Sizes • 3 – 36″/DN80 – DN900 Maximum Working Pressure

Fitting maximum pressure ratings are equivalent to the pressure ratings of the coupling used to install them (See section 7.0 for Reference Materials). Application

Supplied with rigid radius grooves in accordance with ANSI/AWWA C-606 • Connects pipe, provides change in direction, and adapts sizes or components. Pipe Material

Ductile iron, gray iron NOTES • Fittings conform to ANSI A21.10/AWWA

C-110 for center-to-end dimensions and AWWA C-153 or ANSI A21.10/AWWA C-110 for wall thickness.

Fittings are available with flanged ends wherever grooved ends are shown.

Linings include cement/mortar Type 2 (standard) and others. Fittings can readily be prepared for glass lining by others.

fittings shown have an end-to-end dimension tolerance of ±1⁄8″ in all sizes and styles.

can supply tapped fittings on order to ANSI B16.1 dimension locations. Specify fitting size, tap location by letter on order. • Grooved end base 90° elbows and base tees are available with dimensions to ANSI B16.1.

Product size(Specification)