ODM OEM Duct Coupling Factory Quotes – Angle-Pad Coupling 300Psi – DIKAI
ODM OEM Duct Coupling Factory Quotes – Angle-Pad Coupling 300Psi – DIKAI Detail:
Style 1X Angle pad rigid Coupling
1.Product introduction:
an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so-called ‘snaking’ of a long straight run. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13.With the removal of only one bolt you can make a fast and easy ‘swing-over’ installation The angle pad design allows for fast and easy swing-over installation with the removal of a single bolt.
The Angle-pad coupling design standard rigid coupling for the general piping application where rigidity is required including value connections,mechanical rooms,fire mains and long straight runs.The angle-pad design allows the coupling housings to slide along the bolt pads when tightened.The result is an offset clamping action which provides a rigid joint that resists flexural and torsional loads.Support and hanging requirements correspond to ANSI B31.1,B31/9 and NFPA 13.
•Model 1X Angle pad rigid coupling
•This rigid coupling allows for more accurate positioning of the tube end,forming a fixed tube end separation,which should be considered in the design and installation.
•Enhanced body resits 4 times working pressure.
2.Product size(Specification)
3.Product Feature And Application
Housing material:Ductile iron conforming to ASTM A-536,grade 65-45-12
•FM Approved & UL Listed:R.W.P.rated working pressure 300PSI(2.065 Mpa/20.65 bars)
•Housing Finish:Fusion Bonded Epoxy Coated(Optional:Hot Deep Galvanized and Others)
Coupling gasket material:EPDM(Optional：Nitrile NBR,Silicone and others)
•In addition to the points listed in this table,but also according to customer requirements to provide a variety of special point of the elbow.
•Size Range:DN25 through DN3000 (1’’ through 12’’)
4.Product Qualification
5.Deliver,Shipping And Serving
Ship from Tianjin or another Seaports
Product detail pictures:
Related Product Guide:
Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for ODM OEM Duct Coupling Factory Quotes – Angle-Pad Coupling 300Psi – DIKAI , The product will supply to all over the world, such as: Puerto Rico, Mauritius, Munich, Adhering to the principle of "Enterprising and Truth-Seeking, Preciseness and Unity", with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective products and meticulous after-sales service. We firmly believe that: we are outstanding as we are specialized.
By Edwina from Mecca - 2017.03.28 16:34
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Rosalind from Houston - 2018.12.14 15:26
