High-Quality OEM Ul Grooved Couplings Manufacturers Suppliers – Angle-Pad Coupling 300Psi – DIKAI
High-Quality OEM Ul Grooved Couplings Manufacturers Suppliers – Angle-Pad Coupling 300Psi – DIKAI Detail:
Style 1X Angle pad rigid Coupling
1.Product introduction:
an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so-called ‘snaking’ of a long straight run. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13.With the removal of only one bolt you can make a fast and easy ‘swing-over’ installation The angle pad design allows for fast and easy swing-over installation with the removal of a single bolt.
The Angle-pad coupling design standard rigid coupling for the general piping application where rigidity is required including value connections,mechanical rooms,fire mains and long straight runs.The angle-pad design allows the coupling housings to slide along the bolt pads when tightened.The result is an offset clamping action which provides a rigid joint that resists flexural and torsional loads.Support and hanging requirements correspond to ANSI B31.1,B31/9 and NFPA 13.
•Model 1X Angle pad rigid coupling
•This rigid coupling allows for more accurate positioning of the tube end,forming a fixed tube end separation,which should be considered in the design and installation.
•Enhanced body resits 4 times working pressure.
2.Product size(Specification)
3.Product Feature And Application
Housing material:Ductile iron conforming to ASTM A-536,grade 65-45-12
•FM Approved & UL Listed:R.W.P.rated working pressure 300PSI(2.065 Mpa/20.65 bars)
•Housing Finish:Fusion Bonded Epoxy Coated(Optional:Hot Deep Galvanized and Others)
Coupling gasket material:EPDM(Optional：Nitrile NBR,Silicone and others)
•In addition to the points listed in this table,but also according to customer requirements to provide a variety of special point of the elbow.
•Size Range:DN25 through DN3000 (1’’ through 12’’)
4.Product Qualification
5.Deliver,Shipping And Serving
Ship from Tianjin or another Seaports
Product detail pictures:
Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for High-Quality OEM Ul Grooved Couplings Manufacturers Suppliers – Angle-Pad Coupling 300Psi – DIKAI , The product will supply to all over the world, such as: Portland, Yemen, Bangladesh, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Henry stokeld from United States - 2018.12.10 19:03
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Kevin Ellyson from Maldives - 2018.03.03 13:09
