Wholesale China Screwed Ball Valve Factory Quotes – Grooved End Cap – DIKAI

Style 300 Grooved End Cap

1.Product introduction:

Style 300 Grooved End cap, it is used for connection pipes.They are very important pipe joint parts which use for control,distribute,or support pipeline in various sizes or directions.It mainly used in fire protection system,civil water,sewage treatment….

By this kind connection,to save a lot of times and very quickly installation,as well as easy maintenance.

The raw material of this Grooved End Cap is ductile iron per ASTM A536 Gr.65-45-12 and or ASTM A395 Gr.65-45-15.C-E dimensions are manufacturer’s standard It is connected with coupling and cooperates with each other.It is used in the place where the diameter of fire pipeline

We use this Grooved End Cap to block the pipes,In order to prevent the water flow down.Usually it apply for the fire protection water pipes.Its application is very extensive.

It is listed by underwriters Laboratories of the FM Approved.

2.Product size(Specification)

3.Product Feature And Application

Housing material:Ductile iron conforming to ASTM A-536,grade 65-45-12
•FM Approved & UL Listed:R.W.P.rated working pressure 300PSI(2.065 Mpa/20.65 bars)
•Housing Finish:Fusion Bonded Epoxy Coated(Optional:Hot Deep Galvanized and Others)
Coupling gasket material:EPDM(Optional：Nitrile NBR,Silicone and others)
•In addition to the points listed in this table,but also according to customer requirements to provide a variety of special point of the elbow.
•Size Range:DN25 through DN3000 (1’’ through 12’’)

4.Product Qualification

5.Deliver,Shipping And Serving
Ship from Tianjin or another Seaports