Featured
-
High-Quality OEM Automatic Roll Grooved Machine Factory Quotes – Style Grooved Reducing Cross – DIKAI
Product introduction The Elbow are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard.It is connected with coupling and cooperates with each other. It is used in the place where the diameter of fire pipeline changes. which is mainly used in water spray system and fire water system. Grooved pipe parts together with grooved couplings ensure fast and easy installation of piping. Grooved parts replace the traditional welded p... -
High-Quality OEM Expanding Coupling Manufacturers Suppliers – Heavy Duty Flexible Coupling 500Psi – DIKAI
Product Introduction The heavy duty flexible coupling is designed for use in a variety of general piping applications of moderate or high pressure services. Working pressure is usually dictated by the wall thickness and rating of the pipe being used. The Model 7707 couplings feature flexibility that can accommodate misalignment, distortion, thermal stress, vibration, noise and seismic tremors. The Model 7707 can even accommodate an arced or curved piping layout DO NOT DISASSEMBLE THE COUPLIN... -
ODM OEM Fm Grooved Couplings Factories Pricelist – Heavy Duty Flexible Coupling 1000Psi – DIKAI
Maximum Working Pressure • Accommodates pressures ranging from full vacuum (29.9 in Hg/760 mm Hg) up to 1000 psi/6894 kPa. • Working pressure dependent on material, wall thickness and size of pipe. Application • Joins standard roll grooved and cut grooved pipe, as well as grooved fittings, valves and accessories. • Provides a flexible pipe joint which allows for expansion, contraction and deflection. • Operating temperature dependent upon gasket and/or seal selection – see Section 3.0.... -
High-Quality OEM Flange Facing Factories Pricelist – Flange Adaptor – DIKAI
Flange fittings are used in demanding applications due to their suitability to high pressure, shock, and vibration. They also allow for easy connections between hose and tube or pipe, as well as between rigid lines. For tubing fittings that are larger than one inch in outside diameter, there are issues with both effective tightening and installation. Not only do these joints require larger wrenches, but workers must be able to apply the sufficient torque needed for proper tightening. Installa... -
High-Quality OEM Rigid Coupling 300 Psi Factory Quotes – Heavy Duty Flexible Coupling 1000Psi – DIKAI
Maximum Working Pressure • Accommodates pressures ranging from full vacuum (29.9 in Hg/760 mm Hg) up to 1000 psi/6894 kPa. • Working pressure dependent on material, wall thickness and size of pipe. Application • Joins standard roll grooved and cut grooved pipe, as well as grooved fittings, valves and accessories. • Provides a flexible pipe joint which allows for expansion, contraction and deflection. • Operating temperature dependent upon gasket and/or seal selection – see Section 3.0.... -
ODM OEM Ductile Iron Fittings Factory Quotes – Style Grooved Reducing Cross – DIKAI
Product introduction The Elbow are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard.It is connected with coupling and cooperates with each other. It is used in the place where the diameter of fire pipeline changes. which is mainly used in water spray system and fire water system. Grooved pipe parts together with grooved couplings ensure fast and easy installation of piping. Grooved parts replace the traditional welded p... -
ODM OEM Push Fit Coupler Manufacturers Suppliers – Style 130 Grooved Tee Standard Radius – DIKAI
Product introduction We(CNG) supply 130 Grooved Tee Standard Radius. They are used for connecting Standpipe to control, distribute, or support pipeline in different sizes or directions. By groove connection, project time is saved a lot with fast installation and easy maintenance. We supply grooved pipe fittings for fire fighting system.The Elbow are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard.It is connected with co... -
ODM OEM Forged Steel Couplings Manufacturers Suppliers – Style 1GS Rigid Coupling – DIKAI
Product Introduction Rigid grooved couplings are intended for applications where rigidity is required. This type of couplings is a substitute for traditional flanged or weld joints. Rigidity is obtained through grip teeth in the housing, which permit slightly more movement in the joint than Angle Pad couplings. Rigid coupling is a T&G(tongue & groove)design rigid coupling for moderate pressure applications where rigidity is required including valve connections,mechanical rooms,fire ma... -
ODM OEM Malleable Iron Fittings Factory Quotes – Threaded Reducing Cross – DIKAI
Product introduction The Elbow are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard.It is connected with coupling and cooperates with each other. It is used in the place where the diameter of fire pipeline changes. which is mainly used in water spray system and fire water system. Grooved pipe parts together with grooved couplings ensure fast and easy installation of piping. Grooved parts replace the traditional welded p... -
ODM OEM Pvc Puddle Flange Factories Pricelist – Split Flange – DIKAI
A coupling is a mechanical part that connects the shafts of two different machines and rotates together during transmission. Generally speaking, in the process of coupling operation, the two shafts will not be off, but some of the torque limit function of the coupling, in the torque is too large will make the two shaft speed difference, or even off the function. It is also widely known as the “backrest wheel” in processing workshops and factories. The main purpose of the coupling ... -
ODM OEM Grooved Welding Socket Manufacturers Suppliers – 90 Reducing Elbow – DIKAI
Product introduction We(CNG) supply style 90RT 90° Reducing Elbow with Threaded Small End(Add-a-cap). They are used for connecting Standpipe to control, distribute, or support pipeline in different sizes or directions. By groove connection, project time is saved a lot with fast installation and easy maintenance. We supply grooved pipe fittings for fire fighting system.The Elbow are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s... -
Wholesale China Flange Ball Valve Manufacturers Suppliers – Flange Adaptor – DIKAI
Flange fittings are used in demanding applications due to their suitability to high pressure, shock, and vibration. They also allow for easy connections between hose and tube or pipe, as well as between rigid lines. For tubing fittings that are larger than one inch in outside diameter, there are issues with both effective tightening and installation. Not only do these joints require larger wrenches, but workers must be able to apply the sufficient torque needed for proper tightening. Installa...