ODM OEM Duct Coupling Factory Quotes – Angle-Pad Coupling 300Psi – DIKAI
ODM OEM Duct Coupling Factory Quotes – Angle-Pad Coupling 300Psi – DIKAI Detail:
Style 1X Angle pad rigid Coupling
1.Product introduction:
an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so-called ‘snaking’ of a long straight run. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13.With the removal of only one bolt you can make a fast and easy ‘swing-over’ installation The angle pad design allows for fast and easy swing-over installation with the removal of a single bolt.
The Angle-pad coupling design standard rigid coupling for the general piping application where rigidity is required including value connections,mechanical rooms,fire mains and long straight runs.The angle-pad design allows the coupling housings to slide along the bolt pads when tightened.The result is an offset clamping action which provides a rigid joint that resists flexural and torsional loads.Support and hanging requirements correspond to ANSI B31.1,B31/9 and NFPA 13.
•Model 1X Angle pad rigid coupling
•This rigid coupling allows for more accurate positioning of the tube end,forming a fixed tube end separation,which should be considered in the design and installation.
•Enhanced body resits 4 times working pressure.
2.Product size(Specification)
3.Product Feature And Application
Housing material:Ductile iron conforming to ASTM A-536,grade 65-45-12
•FM Approved & UL Listed:R.W.P.rated working pressure 300PSI(2.065 Mpa/20.65 bars)
•Housing Finish:Fusion Bonded Epoxy Coated(Optional:Hot Deep Galvanized and Others)
Coupling gasket material:EPDM(Optional:Nitrile NBR,Silicone and others)
•In addition to the points listed in this table,but also according to customer requirements to provide a variety of special point of the elbow.
•Size Range:DN25 through DN3000 (1’’ through 12’’)
4.Product Qualification
5.Deliver,Shipping And Serving
Ship from Tianjin or another Seaports
Product detail pictures:
Related Product Guide:
Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for ODM OEM Duct Coupling Factory Quotes – Angle-Pad Coupling 300Psi – DIKAI , The product will supply to all over the world, such as: Lyon, India, Detroit, So We also continuously function. we, focuse on high quality, and are conscious of the importance of environmental protection, most of the merchandise are pollution-free, environmentally friendly products, reuse on the solution. We've Updated our catalog, which introduces our organization. n detail and covers the primary items we provide at present, You may also visit our web-site, which involves our most recent product line. We look forward to reactivating our company connection.
By Murray from Swiss - 2018.06.28 19:27
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Sarah from Jordan - 2018.07.26 16:51